Bittle Not Working
I bought the bittle during the initial go-fundme a few years ago. I tried setting it up and it was kind of working but not working properly. Now I have tried again on a new laptop via the usb. Windows is not detecting the bittle at all. The usb board lights up with the yellow light on that board flashing a few times then turns off. On the nyboard it is the blue light only. I hold down the reset button and the usb dongle's yellow light is solid red. I have restarted my computer, unplugged the battery and tried that same issue. When it powers on there is this beep that lasts for 2-3 seconds. I have moved the switch from arduino and back and forth the software cannot find it nor can arduino. Please help! Thank you.
Board is the nyboard v1_0.
121 Views
Super-unhelpful. You can't upgrade the firmware" if you cannot connect via USB (or bluetooth). I've tried on both Mac and Windows and using both USB-C and mini-USB. Always get this error: "The Device Doesn't seem to be a Petoi Robot" no matter what I do. No one has bothered to review this issue here: https://www.petoi.camp/forum/basic-assembly-and-setup/the-device-doesn-t-seem-to-be-a-petoi-robot