Forum Posts

Einfari Âûtomata
Mar 02, 2022
In General Discussions
Does anyone have 3d printable files for the bittle tail? I bought a second bittle kit to make a new head and tail to turn into a cosplay prop. I found the head models in meshmixer but need to make a new tail for the prop as well. The goal is to turn a black bittle set into a Nugget from Genlock. I have a 3D model already and put the head on a bittle frame but just need a tail that works now.
Bittle tail STL? content media
0
1
45
Einfari Âûtomata
May 10, 2021
In General Discussions
I was trying to change the position of the Kzero on bittle to make him try to do a handstand. I was able to get the new servo positions to work but ran into a new error. Now when I try to get Bittle to do skills now, my Bittle just spazzes and acts like he is doing a fast gait without moving forward rather than a skill. I did have some issues with the programmer out of sync so is there something wrong with my code or is the skill data getting corrupted from the sync issues? Resetting my zero numbers back from the new values didn't seem to help either. This is what I uploaded after resetting the zero values back to zero. I'm really confused as to how I broke my Bittle's skills without altering them at all.
Skills no longer working content media
0
1
44
Einfari Âûtomata
May 01, 2021
In Showcase
I felt like Bittles eyes seemed so hollow that he needed something a little extra. Thanks to my extra 5mm LEDs and resistors from an ATmega kit, I was able to give bittle eyeballs but connecting them to the 5V and GND pins in the front of the board. They are simple lights and just turn on when I power on the dog but I feel like they give him character!
My Bittle has eyeballs! content media
8
5
356
Einfari Âûtomata
Apr 12, 2021
In General Discussions
I have been playing with Bittle now that I got him working and I really want to give him LED eyes of some sort. I have some 5 mm LEDs in red, yellow, and blue from an ATMega kit and was wondering if something like that would be the right specs for them. I do have some extra wires from the kit too so I could wire it through the head and onto the board. I just want to make sure that it would be safe to add such lights made to be used with arduino kits before I go ahead and do it. I have the resistors that came with the same kit too but not sure which ones I would use.
0
8
96
Einfari Âûtomata
Mar 28, 2021
In General Discussions
I got my bittle a few days ago and so far, he seems to be connected and got the board to run but am having issues running calibration. Remote doesn't work at all, so I am trying to set calibration to c. I can hear the joints making noise and I align them with that menu on, but when I try to do the kbalance, the legs only move a slight bit or not at all. I have tried running it with both opencat io and writeinstinct with similar results. My calibration constants are reading weird too even though they should be resetting to zero points when I use the c key according to the instructions. Does anyone know what the issue could possibly be with the weird constants and the joints not moving how they should. I would greatly appreciate the help.
0
6
133
Einfari Âûtomata
More actions