Forum
Robot Shop
More
Please read through the user manual at docs.petoi.com
The following problems are already covered in the manual:
The IR remote doesn't work
You may need to install the 2.6.1 version of the IRremote library.
It stays in kneeled mode (like for calibration)
You need to upload WriteInstinct.ino and enter the commands properly to save the constants.
It flashes blue and then after 5 seconds turns itself off.
You need to long-press the power button to turn on/off the battery.
@Jan-Willem Jonker If you can control Bittle via console, then the battery and the control system should be ok.
Do you have a video showing how you are operating the remote and the outputs on the serial monitor?
Please read through the user manual at docs.petoi.com
The following problems are already covered in the manual:
The IR remote doesn't work
You may need to install the 2.6.1 version of the IRremote library.
It stays in kneeled mode (like for calibration)
You need to upload WriteInstinct.ino and enter the commands properly to save the constants.
It flashes blue and then after 5 seconds turns itself off.
You need to long-press the power button to turn on/off the battery.