When the Biboard is supplying 5V to power a Raspberry Pi, would it hurt anything to connect the USB from the Pi to the USB-C input of the Biboard? I just want to make sure that connecting the live USB power back to the Biboard would not be a problem. Thanks.
14:25:22.101 ->
Hi - When I try to run opencat32 It appears that everything works, but at the end the serial monitor reports that the camera fails to start.
Any help would be appreciated.
⸮ ⸮ ⸮⸮ ⸮ ⸮⸮ ⸮ ⸮⸮ ⸮⸮ ⸮⸮ ⸮ ⸮ ⸮ ⸮⸮⸮ ⸮ ⸮⸮ ⸮ ⸮ ⸮ ⸮⸮ ⸮ ⸮⸮ ⸮ ⸮⸮ ⸮ ⸮⸮ ⸮ ⸮⸮ ⸮ ⸮⸮⸮ ⸮⸮⸮⸮⸮⸮⸮ ⸮ ⸮⸮⸮ ⸮ ⸮⸮⸮⸮ ⸮⸮⸮⸮ ⸮⸮ ⸮⸮⸮⸮ ⸮ ⸮⸮⸮⸮ ⸮ ⸮ ⸮⸮⸮⸮⸮⸮⸮ ⸮⸮ ⸮ ⸮⸮ ⸮ ⸮ ⸮ ⸮⸮ ⸮⸮⸮ ⸮⸮⸮⸮ ⸮⸮ ⸮⸮ ⸮⸮ ⸮⸮⸮⸮⸮⸮ ⸮ ⸮⸮ ⸮⸮ ⸮⸮ ⸮⸮⸮⸮ ⸮⸮ ⸮⸮ ⸮ ⸮⸮⸮⸮ ⸮ ⸮⸮ ⸮ ⸮ ⸮⸮⸮⸮ ⸮⸮ ⸮⸮ ⸮⸮⸮ ⸮⸮ ⸮⸮ ⸮⸮ ⸮ ⸮ ⸮ ⸮⸮ ⸮⸮ ⸮⸮ ⸮⸮⸮ ⸮ k
14:25:22.339 -> Flush the serial buffer...
14:25:22.339 ->
Which Grove socket do you plug in? It should be as follows:
Make sure the dial switches on the Mu camera is as v ^ v v (the second switch dialed up to I2C).
Please send serial command XC in the serial monitor to switch to Camera mode.
and press the reset button on the Mu camera
I'm trying to use Mind+ with Bittlex on my Macs. My M1 MBP won't stay connected after one initial execution of a routine. My older Intel Mac connects initially but, after restarting Mind+ and Bittlex, I have to forget the bluetooth device and reconnect it.
None of my many other bluetooth devices has this problem. I think it's been a know issue for a long time now and wonder if there has been any progress on a fix. Thanks.
--Dave
I had Bluetooth issues on my Mac before, and resetting the Bluetooth module helped. Also, make sure your device is fully charged and close to the Mac. When I was working on a Journal Publication Service project, these fixes saved me a lot of time!
Just received a new Bittle X today, purchased from petoi via Amazon. I am a bit disappointed to find out that it came with a v0_2 biboard instead of the newer v1 board, given that I’ve purchased it brand new and paid full price. I’m having a hard time finding information on what exactly the differences are between these boards, can someone explain what exactly changed in v1, and what the limitations/support outlook for v0 line is? Trying to figure out if it’s worth the trouble of returning it and getting a v1 board.
Please check the comparison chart of the controller boards. The BiBoard V1 was developed recently and we haven't officially release it, and it will be slightly more expensive than the V0. It was only shipped out when some warehouse has no BiBaord V0 left.
It works! No perpetual power supply but tapping into 5V to power the RPi and connecting the USB to USB-c worked with no ill effects. I just have to mount the old RPi 2 I've been using and see how well Bittle moves and if the battery life goes down too much. If it doesn't work well, I'll pick up a RPi 0W which also works with VirtualHere. Then I'll do a separate post to let people know of this alternative wifi solution.