Nybble falls over when saying hi with left paw
Hello! My Nybble is setup and configured and calibrated and all of that. She can walk and do all sorts of cool things!
For some reason however no matter how much I calibrate the right front paw or the left rear paw are about a 1/4" off the ground when I do sit and if I do the hi command it works in one direction but Nybble unfortunately falls over if she waves the left paw.
I spent quite a long time calibrating and it's as near perfect as it will get. I also improved it quite a bit by making sure all the servos were flush. It's still a bit off though and wonder what I could do to trouble shoot it. I took a measuring tape and the shoulder to shoulder is the same length on the left and right side if you measure front to back. So to me that means only a slight tilt on either the front shoulders or back pelvis is off but I don't know how to go about fixing that. Everything is pushed together tight as it can go.
This really bothers me because the hi command is how I introduce Nybble to people. Any help greatly appreciated.
Maybe you uploaded a non-standard mode that disabled the IR functionality.